5.0/ 5.0
100% pembeli merasa puas
54 rating • 19 ulasan
5(53)98.15%
4(1)1.85%
3(0)0%
2(0)0%
1(0)0%
Atur jumlah dan catatan
Stok: Habis
Subtotal
-
Corsair RGB to Asus Aura/MSI Mystic Light ARGB Adapter Cable Konektor
Rp50.000
- Kondisi: Baru
- Min. Pemesanan: 1 Buah
- Etalase: Kabel RGB CORSAIR
Corsair RGB to Asus Aura/MSI Mystic Light Addressable RGB Adapter Cable
Want to control your Asus Aura and MSI Mystic Light ARGB devices with Corsair's iCue? This adapter connects your Corsair RGB Lighting Channel (such as on a Lighting Node Pro or a Commander Pro) to the ARGB connector that Asus, MSI, and AsRock use. The result? You can now control the wide array of Aura and Mystic Light compatible ARGB devices right along with your Corsair RGB devices! And, if you have more than one device, you can use our Corsair RGB Lighting Channel Splitter to use multiple adapters with a single Lighting Channel!
1) This adapter only works with a Lighting Node Pro or Commander Pro. It will not work directly with an RGB Fan LED Hub or Lighting Node Core. To use with either of these devices, you can use the Corsair Fan Hub to Strip/Lighting Channel adapter.
2) If your device does not have its own power source, you need to make sure that the current draw on a single Corsair Lighting Channel is limited to approximately 2A (10W). This will come out to roughly 60 RGB LEDs however you'll need to check the specifications of any LEDs that you connect. If you exceed the limit, you may blow a fuse in your Lighting Channel.
3) You'll have to configure your devices in iCue based on the number of LEDs. You can choose from HD (12 LEDs), LL (16 LEDs), and ML (4 LEDs) fans or RGB Strips (10 LEDs). Do not configure them as SP-RGB fans! You'll need to count the number of LEDs on your devices and then configure the lighting channel to have the same (or slightly greater) number of LEDs. Example: 1 Phanteks Aura-compatible ARGB Strip has 30 LEDs. This is then configured in iCue as 3 RGB Strips (30 LEDs). It could also be configured as 3 HD Fans (36 LEDs) or 2 LL fans (32 LEDs). Experimenting with the setup can lead to some interesting effects.
Konektor CORSAIR RGB 3 Pin Male to 4P-1 Male Connector.
Panjang kabel 50 cm.
Want to control your Asus Aura and MSI Mystic Light ARGB devices with Corsair's iCue? This adapter connects your Corsair RGB Lighting Channel (such as on a Lighting Node Pro or a Commander Pro) to the ARGB connector that Asus, MSI, and AsRock use. The result? You can now control the wide array of Aura and Mystic Light compatible ARGB devices right along with your Corsair RGB devices! And, if you have more than one device, you can use our Corsair RGB Lighting Channel Splitter to use multiple adapters with a single Lighting Channel!
1) This adapter only works with a Lighting Node Pro or Commander Pro. It will not work directly with an RGB Fan LED Hub or Lighting Node Core. To use with either of these devices, you can use the Corsair Fan Hub to Strip/Lighting Channel adapter.
2) If your device does not have its own power source, you need to make sure that the current draw on a single Corsair Lighting Channel is limited to approximately 2A (10W). This will come out to roughly 60 RGB LEDs however you'll need to check the specifications of any LEDs that you connect. If you exceed the limit, you may blow a fuse in your Lighting Channel.
3) You'll have to configure your devices in iCue based on the number of LEDs. You can choose from HD (12 LEDs), LL (16 LEDs), and ML (4 LEDs) fans or RGB Strips (10 LEDs). Do not configure them as SP-RGB fans! You'll need to count the number of LEDs on your devices and then configure the lighting channel to have the same (or slightly greater) number of LEDs. Example: 1 Phanteks Aura-compatible ARGB Strip has 30 LEDs. This is then configured in iCue as 3 RGB Strips (30 LEDs). It could also be configured as 3 HD Fans (36 LEDs) or 2 LL fans (32 LEDs). Experimenting with the setup can lead to some interesting effects.
Konektor CORSAIR RGB 3 Pin Male to 4P-1 Male Connector.
Panjang kabel 50 cm.
Ada masalah dengan produk ini?