5.0/ 5.0
100% pembeli merasa puas
40 rating • 13 ulasan
5(40)100%
4(0)0%
3(0)0%
2(0)0%
1(0)0%
4P-1 3Pin
Atur jumlah dan catatan
Stok: 32
Subtotal
Rp50.000
Kabel Adapter Corsair RGB Fan LED HUB or Node Core to JST SM 3 Pin - 4P-1 3Pin
Rp50.000
Pilih warna: 4P-1 3Pin
- Kondisi: Baru
- Min. Pemesanan: 1 Buah
- Etalase: Kabel RGB CORSAIR
Corsair RGB LED Fan Hub / Lighting Node Core to JST SM Adapter Cable
This adapter connects Corsair RGB LED Fan Hub Port to a JST-SM series connector that you'll find with Phanteks, Lian Li and many other 3rd party RGB strips and products.
You'll need to configure your devices in iCue based on the number of LEDs. You can choose from HD (12 LEDs), LL (16 LEDs), and ML (4 LEDs) fans or RGB Strips (10 LEDs). Do not configure them as SP-RGB fans! You'll need to count the number of LEDs on your devices and then configure the lighting channel to have the same (or slightly greater) number of LEDs. Example: 1 Phanteks Aura-compatible ARGB Strip has 30 LEDs. This is then configured in iCue as 3 RGB Strips (30 LEDs). It could also be configured as 3 HD Fans (36 LEDs) or 2 LL fans (32 LEDs). Experimenting with the setup can lead to some interesting effects.
This will connect to a fan port on the Corsair RGB LED Fan Hub or Lighting Node Core.
If your device does not have its own power source, you need to make sure that the current draw on a single Corsair RGB LED Fan Hub / Lighting Node Core is limited to approximately 4A (20W). This will come out to roughly 120 RGB LEDs. If you exceed the limit, you may blow the capacitor in the RGB LED Fan Hub / LNC.
PENTING!!!
Hanya bisa dipasang 1 buah kabel adapter ini per 1 Node Core/RGB HUB. Tidak bisa dipasang bersamaan lebih dari 1 buah pada Node Core/RGB Hub yang sama.
Jika diperlukan lebih dari satu maka bisa ditambahkan Splitter pada kabel adapter ini. Atau beli Hub yang sudah dimodifikasi untuk Corsair (lihat etalase atau chat seller).
This adapter connects Corsair RGB LED Fan Hub Port to a JST-SM series connector that you'll find with Phanteks, Lian Li and many other 3rd party RGB strips and products.
You'll need to configure your devices in iCue based on the number of LEDs. You can choose from HD (12 LEDs), LL (16 LEDs), and ML (4 LEDs) fans or RGB Strips (10 LEDs). Do not configure them as SP-RGB fans! You'll need to count the number of LEDs on your devices and then configure the lighting channel to have the same (or slightly greater) number of LEDs. Example: 1 Phanteks Aura-compatible ARGB Strip has 30 LEDs. This is then configured in iCue as 3 RGB Strips (30 LEDs). It could also be configured as 3 HD Fans (36 LEDs) or 2 LL fans (32 LEDs). Experimenting with the setup can lead to some interesting effects.
This will connect to a fan port on the Corsair RGB LED Fan Hub or Lighting Node Core.
If your device does not have its own power source, you need to make sure that the current draw on a single Corsair RGB LED Fan Hub / Lighting Node Core is limited to approximately 4A (20W). This will come out to roughly 120 RGB LEDs. If you exceed the limit, you may blow the capacitor in the RGB LED Fan Hub / LNC.
PENTING!!!
Hanya bisa dipasang 1 buah kabel adapter ini per 1 Node Core/RGB HUB. Tidak bisa dipasang bersamaan lebih dari 1 buah pada Node Core/RGB Hub yang sama.
Jika diperlukan lebih dari satu maka bisa ditambahkan Splitter pada kabel adapter ini. Atau beli Hub yang sudah dimodifikasi untuk Corsair (lihat etalase atau chat seller).
Ada masalah dengan produk ini?