Sample Concentrator Nitrogen Evaporator comple with Regulator Valve

Sample Concentration — Brand : ALLSHENG , Model : KD200 KD200 sample concertration is mainly used for the concentration and preparation of large-scale samples, such as sample preparation in drug screening, hormone analysis, liquid phase, gas phase and mass spectrometry analysis. Features : •Professionally-designed block, tester can be observed at the surface location of concentrated samples •Depending on the test-tube size and solvent volume they can be individually raised or lowered to the height •Easy operation; safe and reliable to use •The heater enables the sample to be quickly and efficiently heated to the evaporation temperature, and at the same time the gas is blown from the gas chamber to the surface of the solution through the gas needle, which promotes rapid evaporation of the solution and concentration of the sample •Each purging needle can be independently controlled, can be purged separately, and can be adjusted independently, without wasting gas •The position of the gas needle in the gas chamber can be changed to make it suitable for different test tubes. The standard gas needle length is 150 mm •The height of the air cavity can be adjusted, this product has a unique feature: the liquid level position of the concentrated sample can be observed at any time when the sample is concentrated •When concentrating toxic solvents, the entire system can be placed in a fume hood •Automatic fault detection and alarm function •Standard with air chamber and special adjustable stand •Built-in over temperature protection device •Real time temperature display, time decrement display Temperature control range : RT.+5 ℃～150 ℃ Temperature control discrepancy : ≤1 °C (RT.+5 °C~100 °C) ≤1.5 °C (100 °C~150 °C) Heating time (from 40 °C to 150 °C) : ≤30 min Timer range : 1 min-99 h59 min Maximum input power : 400 W Temp. control discrepancy : 0.1 ℃ Needle length : 150 mm Include 1 pcs Block BD05 gt; gt; 12 holes x diameter 16 mm