4.9/ 5.0
98% pembeli merasa puas
119 rating • 33 ulasan
5(112)94.12%
4(5)4.2%
3(0)0%
2(0)0%
1(2)1.68%
45 MM ORANGE
Atur jumlah dan catatan
Stok: 88
harga sebelum diskonRp88.000
Subtotal
Rp79.200
Ban Dalam Liteskin Airing TPU Inner Tube 36G 700C 23c -30C Ultralight - 45 MM ORANGE
Rp79.200
diskon 10%
Harga sebelum diskon Rp88.000
Pilih presta: 45 MM ORANGE
- Kondisi: Baru
- Min. Pemesanan: 1 Buah
- Etalase: ASESORIS SEPEDA
READY!!!
TANPA PO PO
SANGAT RINGAN CUMAN 36 GRM
About Liteskin
2023 Sponsoring Chinese MTB National Champion KJ Feng.
Installation Guide
Do not use tyre lever to install the tyre to avoid piecing. Recommend to install it manually.
Installed the inner tube with tyre and confirm the tube is not twisted.
Pump 1 psi. Push the valve downward and then drag it upward, preventing the tube to be squeezed by tyre bead and rim hook. This is very likely to happen for TPU tube because of its thickness.
Pump.
Push and drag the tube again to prevent squeeze.
Tighten the valve nut.
36 Grams Ultralight. Save nearly 180 grams per bike comparing with normal inner tube.
Superb air tightness as a ultralight inner tube, can use like a normal tube. No need to pump every time before riding.
Comes with aluminum valve cap.
TPU material with brass valve.
Better rolling resistance comparing with normal inner tube.
100% recycleable.
Easy to carry due to smaller dimension.
Recommend for 23-30C.
For rim brake users, brake carefully in steep mountain to avoid high temperature which might lead to deform of the tube.
Theoretically thermo stability and anti puncture performance is between normal tube and latex tube.
Pump to 0.5 PSI before installation. (Do not pump above 6 PSI before installation which will cause irreparable deform.)
TANPA PO PO
SANGAT RINGAN CUMAN 36 GRM
About Liteskin
2023 Sponsoring Chinese MTB National Champion KJ Feng.
Installation Guide
Do not use tyre lever to install the tyre to avoid piecing. Recommend to install it manually.
Installed the inner tube with tyre and confirm the tube is not twisted.
Pump 1 psi. Push the valve downward and then drag it upward, preventing the tube to be squeezed by tyre bead and rim hook. This is very likely to happen for TPU tube because of its thickness.
Pump.
Push and drag the tube again to prevent squeeze.
Tighten the valve nut.
36 Grams Ultralight. Save nearly 180 grams per bike comparing with normal inner tube.
Superb air tightness as a ultralight inner tube, can use like a normal tube. No need to pump every time before riding.
Comes with aluminum valve cap.
TPU material with brass valve.
Better rolling resistance comparing with normal inner tube.
100% recycleable.
Easy to carry due to smaller dimension.
Recommend for 23-30C.
For rim brake users, brake carefully in steep mountain to avoid high temperature which might lead to deform of the tube.
Theoretically thermo stability and anti puncture performance is between normal tube and latex tube.
Pump to 0.5 PSI before installation. (Do not pump above 6 PSI before installation which will cause irreparable deform.)
Ada masalah dengan produk ini?