Loop Detector PD-132 DC 24V Inductive Single Vehicle Controller Module

PD132 DC 24V
Loop detector biasa digunakan untuk mendeteksi kendaraan pada sistem parkir. Pemasangan loop detector harus dipasang di lokasi yang terlindung dari air dan panas dan sedekat mungkin dengan loop.

Lampu Indikator:
- Merah (power) akan menyala selama loop detector menerima power.
- Hijau (detect) akan menyala selama 2 detik pertama untuk proses tuning dan setiap kali kendaraan terdeteksi melewati loop. Jika ada masalah dengan loop, lampu hijau akan berkedip.

Technical Data:
- Voltage tolerance AC: +10% / -15%
- Voltage tolerance DC: 15%
- Power Consumption: 4.5VA
- Output relays: 240V/5A
- Operating temperature: -20C to +65C
- Storage temperature: -40C to +85C
- Frequency range: 20 kHz to 170 kHz
- Reaction time: 10ms
- Signal holding time: Unlimited / limited when loop is permanently covered 10 minutes
- Sensitivity: Adjustable in 4 increments
- Loop inductance: Total loop plus connection wiring: 50H to 1000H. Ideal is 100H to 300H
- Loop connection wiring: Maximum length 20 meters, twisted at least 20 times per meter
- Size of Housing: 78x40x108 mm (L x W x H)

PD132 Dengan spek lain:
- AC 220V: https://www.tokopedia.com/electron/loop-detector-single-pd-132-ac220v-inductive-vehicle-controller-module
- DC 12V: https://www.tokopedia.com/electron/loop-detector-single-pd-132-dc12v-inductive-vehicle-controller-module
- DC 24V: https://www.tokopedia.com/electron/loop-detector-pd-132-dc-24v-inductive-single-vehicle-controller-module