New 4Heads LCD Chiropractic Adjust Electric Correction Gun Massager

Features: MaterialABS, Stainless Steel ColorWhite Product Weight2.2 kg Voltage110-240V Level: 4 Level 100N 200N 300N 400N Instructions: 1. Connect the plug to the Power outlet. After 3-5 seconds, The Chiropractic Adjusting Gun will be issued a eep\ is heard, that boot ok. 2, There must be a force point at Rubber head when you use it.(no point, the machine will not work) 3. Adjust the intensity according to the needs of use . You can Press the button to Adjust the intensity (high, medium and low) 4. according to the need to install replacement the work head. 5.Brief steps: a. Connect the plug to the Power outlet, pick up the Adjusting gun. b. Put the rubber head on the needed beaten. Push down the top. c. The fingers to pull the trigger when the Black part put into about half. d. The tool will automatically hit back and forth, The number depends on the beat position (up to 10 times) e. After the tool stops working, repeat the operation according to the above steps f. When the tip out of the beat area, the tool stop the action immediately . Note: Must be tight top can hit, the greater the intensity of the top, the greater the intensity of the blow.so we should choose the appropriate stalls, can not directly hit the top of the bones.