Atur jumlah dan catatan
Stok Total: Sisa 1
Subtotal
Rp3.904.000
Ready JT PARVUM High End RDA (Bundle MTL Cap) - Authentic
Rp3.904.000
- Kondisi: Baru
- Min. Pemesanan: 1 Buah
- Etalase: Semua Etalase
PARVUM High End RDA (Bundle MTL Cap) - 100% Authentic by EVADE Mods
[Set contents]
' Parvum -
AFC top cap (available for 510 drip chips)
- Chamber cap
- Deck -
MTL top cap -
DELRIN tip
- Inner diameter: 5.0 mm
- Outer diameter: 11.0 mm
' Spare kit (Orings / Screws / Hex Wrench)
[Main body specification]
' Single coil RDA / BF compatible
' Diameter: 22.0
mm ' Total length: 16 mm
* When using DELRIN chip: 8Mm Tasu
' juice wells: 5 mm
' 2 post and narrow coil space (15 * 5.5mm) + single air
-AFC (TOPCAP orientation / 2.5 * 1.5mm Hall / 0 To Max)
'' MTL cap is 1mm Hall / 0 To Max
' Body: SS 316
' Made in Italy
is the emergence of high-senior RDA from Italy.
It is just 22 mm in size, but when you open the cap you will realize the fun of the structure.
It is a design made as narrow as possible so that 2 posts dedicated to single coil and 5 mm well were made deeply. A good taste will come out.
The SS part which was made extra for narrowing has the impression that it is likely to have heat, but it is thought that the mouth becomes hard to become hot by the heat sink which is also the liver of the design of the top cap.
It is also good to enjoy a heavy draw of 1 mm when you attach the included MTL cap, and it is also ant to enjoy moderate DL with a standard equipped cap ''
[Set contents]
' Parvum -
AFC top cap (available for 510 drip chips)
- Chamber cap
- Deck -
MTL top cap -
DELRIN tip
- Inner diameter: 5.0 mm
- Outer diameter: 11.0 mm
' Spare kit (Orings / Screws / Hex Wrench)
[Main body specification]
' Single coil RDA / BF compatible
' Diameter: 22.0
mm ' Total length: 16 mm
* When using DELRIN chip: 8Mm Tasu
' juice wells: 5 mm
' 2 post and narrow coil space (15 * 5.5mm) + single air
-AFC (TOPCAP orientation / 2.5 * 1.5mm Hall / 0 To Max)
'' MTL cap is 1mm Hall / 0 To Max
' Body: SS 316
' Made in Italy
is the emergence of high-senior RDA from Italy.
It is just 22 mm in size, but when you open the cap you will realize the fun of the structure.
It is a design made as narrow as possible so that 2 posts dedicated to single coil and 5 mm well were made deeply. A good taste will come out.
The SS part which was made extra for narrowing has the impression that it is likely to have heat, but it is thought that the mouth becomes hard to become hot by the heat sink which is also the liver of the design of the top cap.
It is also good to enjoy a heavy draw of 1 mm when you attach the included MTL cap, and it is also ant to enjoy moderate DL with a standard equipped cap ''
Ada masalah dengan produk ini?
ULASAN PEMBELI
Belum ada ulasan untuk produk ini
Beli produk ini dan jadilah yang pertama memberikan ulasan