4.6/ 5.0
90% pembeli merasa puas
11 rating • 4 ulasan
5(9)81.82%
4(1)9.09%
3(0)0%
2(1)9.09%
1(0)0%
bercahaya
Atur jumlah dan catatan
Stok: 907
Subtotal
Rp62.000
Jam Dinding Diy Angka Huruf/Jam Diy Tempel Tembok Wall Clock - bercahaya
Rp62.000
Pilih warna: bercahaya
- Kondisi: Baru
- Min. Pemesanan: 1 Buah
- Etalase: Semua Etalase
Selamat datang di toko kami.
Biasanya menyimpan barang-barang untuk membuat hidupmu lebih nyaman
Large Wall Clock
Instructions:
1. Find a Blank Wall, put the nails on the place where is going to place the Clock.
2. Hang the clock on te nail
3. Hanging the center hole of the scale on the movement shaft
4. Cut off the extra parts according tp your needs.
5. Let the corresponding positions on the scale coincide withe each other
6. Mark the Places for the numbers with a pen
7. Take out the mirrored arcylic numbers and tear off the double-side tape on the back.
8. Paste arcylic numbers on the corresponding black numbers.
9. Remove the tape on the back of the black numbers.
10. Paste the numbers one by one to the Corresponding Marked Place.
11. Remove the protective film from all digital surfaces.
12. Install the hour hand and align it at 12 o'clock.
13. Install the minute Hand and tighten the nut.
14. Adjust the time clockwise with the gear adjuster.
15. Install a AA Battery ( NOT INCLUDED ) in the right direction.
16. Hanging the disc in place.
17. FINISH.
Semua produk tersedia ^ _ ^
Jika Anda menyukai produk kami, Anda dapat mengikuti toko kami.
Lebih banyak kejutan menanti Anda ^^ + ^
Biasanya menyimpan barang-barang untuk membuat hidupmu lebih nyaman
Large Wall Clock
Instructions:
1. Find a Blank Wall, put the nails on the place where is going to place the Clock.
2. Hang the clock on te nail
3. Hanging the center hole of the scale on the movement shaft
4. Cut off the extra parts according tp your needs.
5. Let the corresponding positions on the scale coincide withe each other
6. Mark the Places for the numbers with a pen
7. Take out the mirrored arcylic numbers and tear off the double-side tape on the back.
8. Paste arcylic numbers on the corresponding black numbers.
9. Remove the tape on the back of the black numbers.
10. Paste the numbers one by one to the Corresponding Marked Place.
11. Remove the protective film from all digital surfaces.
12. Install the hour hand and align it at 12 o'clock.
13. Install the minute Hand and tighten the nut.
14. Adjust the time clockwise with the gear adjuster.
15. Install a AA Battery ( NOT INCLUDED ) in the right direction.
16. Hanging the disc in place.
17. FINISH.
Semua produk tersedia ^ _ ^
Jika Anda menyukai produk kami, Anda dapat mengikuti toko kami.
Lebih banyak kejutan menanti Anda ^^ + ^
Ada masalah dengan produk ini?