76 PROJECTS Enduro Computer Mount Black - Garmin, Type A

76 PROJECTS Enduro Computer Mount Black
SKU A Garmin: 1040G
SKU B Garmin: 1014G
SKU B Wahoo : 1014W

SELF ADHESIVE
COMPUTER MOUNT

Self-adhesive computer mount using 3M VHB tape (very high bond)

Designed to fit onto your top tube behind your stem for maximum protection and less distraction.

NEW FIT OPTIONS
Type A for flat or slightly curved top tubes Maximum curve of up to 3mm drop 12mm from the centre line. Most carbon and aluminium bikes require type A. The base of Type A's has a flat centre with curved 'wings' that flex to the top tube profile, including going all the way to flat.
Type B for round and heavily curved top tubes. Works on round tubes of 34mm, smaller diameters will require the mount being clamped in place overnight in order to ensure a good bond.

We also have a few flat versions left:
Flat for flat top tubes with a minimum of 26mm wide flat area.

Currently available for Garmin Type A only
Our colour options are Cerakote coatings. Cerakote is a ultra thin ceramic coating which is hydrophobic, chemical and scratch resistant.

Top left to bottom right in image:
Standard black (not coated)
Testing has shown that the coating on the enduro mounts are resistant to wear, however the mount and computer should be clean before attaching. The tip of the little Garmin engagement tabs ( at 3 and 9 o'clock) will also wear down to black.
Supplied with alcohol wipe to clean the area to be attached to.
Manufactured in-house using our Multi Jet Fusion industrial 3D printer then shot peened for surface toughness and quality.

INSTRUCTIONS
After fitting the mount should be left overnight before riding, this ensure the adhesive has cured
Recommended for smaller series computers no larger than Wahoo Element Roam, Garmin 500 series. Larger computer are vunerable to knee knocks. As with any mount we recommend loopin
IMPORTANT - Check there is clearance from the underside of bars/stem to the top tube.

Silakan langsung click BELI, barang READY STOCK!