Wellav UMH 252,H.264 SD/HD Encoder

UMH 252 is WellAV #39;s single channel H.264 SD/HD encoder. It supports HDMI, SD/HD SDI, YPbPr, CVBS input and output H.264 SD/HD programs via ASI or TS/IP. It can encode a TS stream from 1.0 Mbps to 20 Mbps based on customer requirements and supports broadcast-level video quality up to 1080P resolution. UMH 252 helps provide high quality H.264 signals for an HD service offering, an IPTV network, or signal transmission via traditional or IP-based network. Features: Complies with the MPEG-4/H.264 AVC standard MPEG-1 Layer I and II audio encoding SD video input format: PAL/NTSC HD Video Input Format: SMPTE-296/SMPTE-274 Supports HDMI, SD/HD SDI, YPbPr and CVBS input Supports video/audio multiplexing of DVB MPEG TS Supports PSI/SI table modification Two identical ASI outputs IP unicast/multicast output with UDP/RTP protocol ordering information H.264 SD/HD encoder Specification: Input video CVBS, SD/HD SDI(BNC), YPbPr, HDMI Audio RCA, SDI (embedded audio) 　 Output Two identical ASI outputs (188 bytes) Unicast/Multicast TS/IP output via UDP or RTP Encoding Bitrate SD (1.0~20Mbps); HD (6.0~20Mbps) 　　 Video Encoding 　 Encoding standard MPEG-4/H.264 AVC HP@L4 Encoding Resolution 1920 x 1080 x 59.94i/50i 1440 x 1080 x 59.94i/50i; 1280 x 720 x 59.94p/50p; 720 x 480 x 59.94i 720x576x50i Configurable GOP　 Bit Rate Control CBR, VBR 　　 Audio Encoding Standard MPEG-1 LayerⅠ amp; II, AAC, AC-3 (optional) Sampling frequency 48KHz Audio mode mono, stereo 　 Management Full front panel control　 LCD display and control keys　 Remote access via TCP/IP　 Network management software 　　 Physical Characteristics Power AC90~250V, 50/60Hz Measure 1RU Dimensions(HxWxD) 44mmx484mmx274mm Net Weight 3.5kg Gross Weight 5kg