BUBBLE CPAP PIGEON WITH HEATER WIRE AND TEMPERATURE PROBE

Bubble CPAP With Humidifier PN2000FB
( With Heater Wire & Temperature Probe)


Working Principle of AD-I NCPAP

The air source is provided by adjusting the air compressor and enters the air oxygen mixer, so that the air oxygen concentration ratio most suitable for adjusting the air oxygen mixer enters the humidification device and enters the human respiratory system through the breathing tube, so that the patient's respiratory circulation is normal.

Features of AD-Series NCPAP

The air compressor uses Thomas/Garshida compression pump, stable performance and high efficiency

High performance high precision air oxygen mixer, can be adjusted to the best air oxygen concentration ratio

The whole respiratory system can be portable and mobile, convenient for emergency and rescue

Specification :

Model AD-Series
FIO2 21-100% (±3%)
CPAP 3-10cm H2O
Flow 2-18LPM
Noise ≤55dB(A)
Power Source AC 220V/110V, 50-60Hz
Gas source Air/Oxygen@0.3-0.4MPa
Alarm Gas supply pressure difference > 0.1MPa
Humidifier Standard: PN-2000F
Optional: PN-2000FB; PN-2000FC850
Air Compressor PN-4000
Trolley Yes


Standart Component :

1. Air Oxygen Blender AD-Series
2. Humidifier PN2000FB (with heater wire & temperature probr)
3. Humidifier Chamber
4. Medical Air Compressor PN4000
5. Bubble Generator
6. Breathing Circuit
7. Interface Nasal Prong Set
- Interface nasal prong
- Infant bonnet
- Nasal tubing
- Sizing guide Connectors

GARANSI SERVICE 1 TAHUN.

* Mohon konfirmasi stok sebelum order
* Info stok & produk via 0821-3344-3288
* Harga di atas sudah termasuk kompresor Medis
* Free Install untuk Jateng & Jatim