HEIDENHAIN 1387 ENCODER ERN1387 204862S14-70 ID 385488-59 / 749144-59 same 749144-59 new version 5V

HEIDENHAIN 1387 ENCODER ERN1387 204862S14-70 ID 385488-59 / 749144-59 same 749144-59 new version 5V 32252116225 Pre-Order +/- Sampai Alamat 10-15 Hari FREE ONGKIR+PAJAK Garansi uang kembali jika Rusak, Beda Produk Application : Grinder Model Number : ERN1387 204862S14-70 Origin : DE(Origin) Certification : CE HEIDENHAIN LIFT ENCODER. ID; 385488-59 and ID; 749144-59 fully generic, the picture on the #34; #34; R4 #34;on behalf of the factory year, with the model does not matter Encoder installation Caution: 1. The encoder is installed should gently push quilt axis, non-collision with a hammer percussion and avoid damage to the shaft and encoder. Please note that the permissible axle load 2. Installation shall not exceed the limit load. 3. Do not exceed the speed limit, if more than allowed by the encoder speed limit, an electrical signal may be lost. 4. Do not use the encoder output lines and power lines around together or in the same tunnel, and it is not in the vicinity of the power strip use, to prevent interference. 5. Before installing the boot, you should carefully check the product manual model is consistent with the encoder, the wiring is correct, wrong wiring can cause damage to the internal circuitry HEIDENHAIN LIFT ENCODER. ID; 385488-59 and ID; 749144-59 fully generic, the picture on the #34; #34; R4 #34;on behalf of the factory year, with the model does not matter Encoder installation Caution: 1. The encoder is installed should gently push quilt axis, non-collision with a hammer percussion and avoid damage to the shaft and encoder. Please note that the permissible axle load 2. Installation shall not exceed the limit load. 3. Do not exceed the speed limit, if more than allowed by the encoder speed limit, an electrical signal may be lost. 4. Do not use the encoder out