Atur jumlah dan catatan
Stok Total: 199
Subtotal
Rp145.000
Pixhawk Ppz Mk Mwc Ppm Encoder V1.0 For Rc Receiver Flight Controller
Rp145.000
- Kondisi: Baru
- Min. Pemesanan: 1 Buah
- Etalase: Semua Etalase
SELAMAT DATANG DITOKO KAMI,
PASTIKAN ANDA MEMILIH PRODUK YG BERKUALITAS DN TERJAMIN MUTU YANG ADA DITOKO KAMI. KAMI MENYEDIAKAN PRODUK PRODUK TERLENGKAP DAN BERGARANSI.
MOHON CHAT ADMIN UNTUK MENANYAKAN STOCK, SIZE, WARNA TERLEBIH DAHULU
Pixhawk/PPZ/MK/MWC/ PPM Encoder V1.0 Version for RC Receiver Flight Controller_x000d_
_x000d_
Features:_x000d_
The PPM Encoder plugs into the PWM servo output ports of any R/C receiver and encodes them into a PPM pulse suitable for many autopilots (e.g. Pixhawk). Modifications to the R/C receiver are not necessary._x000d_
The whole project is based around the ATMEL ATMEGA328p AVR processor and all timing is done within interrupts so accuracy and stability is optimized._x000d_
The design of the PPM Encoder is based on the Paperazzi PPM Encoder._x000d_
_x000d_
Important Note: _x000d_
The firmware comes pre-configured to read 8 Channels. In case you would like to change the settings of the PPM encoder to invert the PPM signal and change the fail safe pre-defined values you will need an AVR ISP programmer in order to reprogram it._x000d_
_x000d_
The jumper on the board no soldering default. In this case the board powered by FC_x000d_
_x000d_
Spesifikasi:_x000d_
Dimension: 28 x 19 x 5mm_x000d_
Net Weight: 8gr _x000d_
_x000d_
Isi Paket:_x000d_
1 x PPM Encoder _x000d_
1 x 10Pin input cable 60mm_x000d_
1 x 4Pin output cable 100m
SKU : 3131/1475712951606788096/55
PASTIKAN ANDA MEMILIH PRODUK YG BERKUALITAS DN TERJAMIN MUTU YANG ADA DITOKO KAMI. KAMI MENYEDIAKAN PRODUK PRODUK TERLENGKAP DAN BERGARANSI.
MOHON CHAT ADMIN UNTUK MENANYAKAN STOCK, SIZE, WARNA TERLEBIH DAHULU
Pixhawk/PPZ/MK/MWC/ PPM Encoder V1.0 Version for RC Receiver Flight Controller_x000d_
_x000d_
Features:_x000d_
The PPM Encoder plugs into the PWM servo output ports of any R/C receiver and encodes them into a PPM pulse suitable for many autopilots (e.g. Pixhawk). Modifications to the R/C receiver are not necessary._x000d_
The whole project is based around the ATMEL ATMEGA328p AVR processor and all timing is done within interrupts so accuracy and stability is optimized._x000d_
The design of the PPM Encoder is based on the Paperazzi PPM Encoder._x000d_
_x000d_
Important Note: _x000d_
The firmware comes pre-configured to read 8 Channels. In case you would like to change the settings of the PPM encoder to invert the PPM signal and change the fail safe pre-defined values you will need an AVR ISP programmer in order to reprogram it._x000d_
_x000d_
The jumper on the board no soldering default. In this case the board powered by FC_x000d_
_x000d_
Spesifikasi:_x000d_
Dimension: 28 x 19 x 5mm_x000d_
Net Weight: 8gr _x000d_
_x000d_
Isi Paket:_x000d_
1 x PPM Encoder _x000d_
1 x 10Pin input cable 60mm_x000d_
1 x 4Pin output cable 100m
SKU : 3131/1475712951606788096/55
Ada masalah dengan produk ini?
ULASAN PEMBELI
Belum ada ulasan untuk produk ini
Beli produk ini dan jadilah yang pertama memberikan ulasan