Incremental Photoelectric Rotary Encoder 400 600 Pulse 5V 12V 24V - 400 Pulse

DC5-24V 360/400/600 Pulses Incremental Photoelectric Rotary Encoder

**PERHATIAN, UNTUK PENGGUNAAN KE ARDUINO/ESP & MCU LAIN
HARAP PIN OUTPUT A DAN B DIBERI RESISTOR PULL-UP 10K KE VCC
***TANPA TAMBAHAN RESISTOR PULL-UP MAKA OUTPUT TIDAK TERBACA (FLOATING)

Tersedia 3 Pilihan Varian
360 Pulse
400 Pulse
600 Pulse

*Catatan : Unit NO BRAND, label sticker bisa berubah setiap lot kedatangan barang
Kualitas, spesifikasi dan ukuran tetap sama dengan deskripsi walaupun beda label/merk.

Feature:

AB two-phase incremental optical rotary encoder 400 pulses
Including NPN open collector output and voltage output two kinds of output.

*Standard with 1.5 m cable
*Performance: 400 pulses / rev.
*Operating voltage: DC5-24V
*Maximum mechanical speed 5000 rev / min
*The electrical response frequency 20K / sec
*Integrated speed 2000 rev / min

*Size:
Encoder diameter : 38mm
shaft diameter : 6.13mm
axis platform : High 5mm, 20mm fixing holes for : M3 screws

Wiring :
Green = A phase
white = B phase
red = Vcc positive supply
black = V0

Contoh Coding Arduinoo :

#define A_PHASE 2
#define B_PHASE 3
unsigned int Counter = 0;

void setup() {
pinMode(A_PHASE, INPUT);
pinMode(B_PHASE, INPUT);
Serial.begin(9600);
attachInterrupt(digitalPinToInterrupt( A_PHASE), interrupt, RISING);
}
void loop() {
Serial.print("Counter : ");
Serial.println(Counter);
delay(100);
}
void interrupt()
{ char i;
i = digitalRead( B_PHASE);
if (i == 1 && Counter>0)
Counter -= 1;
else
Counter += 1;
}