Calcium Tes Kit Ca Test Regent Alat Ukur Kadar Kalsium Sea Salt Water

Determining steps for Calcium 1.Rinse the measuring bottle three times with water sample for determination,add with the 2ml syringe 2ml of water to the test vial. 2.Add 6 drops of Ca-1( There are white deposits when testing seawater samples) and gently shakethe flask for 6 seconds. 3.Add one spoon powder to the test vial and shake gently at this point the water is pink. 4.Take 1 ml of Ca-2 reagent with 1 ml syringe, start adding the Ca-2reagent to the test vial and shake it as it drip.until the color changes to blue.there may be air layer between the liquid and the piston, it will not affect the test result. 5. Hold the syringe with the tip facing upward and read the position of the upper end of the black syringe part. each division corresponds to 0.01ml. The magnesium concentration can be obtained from the table The list is on both sides of the box. Noticse: 1. After each test, rinse vial thoroughly with tap water. 2. The test reagent contents chemical component, pleaseuse it carefully. 3. Reagent must be dtroed in shady and cool place without sunshine. Keep out of reach of children..