SRAM BB Bottom Bracket Press Fit 30 BB30 PF30 79/83 - BB 30 PressFit PF 30 79 83 - As Tengah Sepeda

NOTE: Barang sisa 1, tutup plastik BB nya Tidak ada . tidak ada spacer wave . Kelengkapan seuai di foto barang

SRAM 2013 BOTTOM BRACKET PRESSFIT 30 - 79X83 (00.6415.041.020)

TRUVATIV Bottom Bracket PressFit30
PressFit 30 will feature an integrated seal, pre-assembled into the cups, to further prolong bearing life
Bearings are housed in nylon cups which will be pressed into the frames bottom bracket shell
Designed for 30mm spindle cranksets
BB/Frame Interface: BBright Press Fit,PF30
Spindle Interface Type: BBright,BB30/PF30
BB Shell Width: 79,83mm
Material: Alloy / Sealed bearing

WEIGHT 90 g

SRAM PressFit 30 bottom bracket. We at SRAM saw the opportunity to make a better press fit system where all the best from BB30 and PressFit bottom brackets would be combined into one captivating package. PressFit 30 will feature an integrated seal, pre-assembled into the cups, to further prolong bearing life. The key difference with PressFit 30 is how the bearings are fitted into the frame.

Bearings are housed in nylon cups which will be pressed into the frames bottom bracket shell. This bottom bracket is designed for 30mm spindle cranksets. Frames will need a 46mm inner-diameter bottom bracket shell to accommodate this system. PressFit 30 for road will require a 68mm wide shell while PressFit 30 for MTB will require a 73 mm wide shell.