Panasonic DP-102 Digital Vacuum Controller Indicator DC 12V 24V

*** READY STOCK, SILAHKAN DI ORDER *** *** Panasonic DP-102 Digital Pressure Controller -0.1 ~ 1 MPa *** 100% New Original Genuine, NOT Refurbished, NOT Secondhand !! Accurate Pressure/Vacuum Sensor with Superior Visibility Part Number: DP-102 Process connector: M5 Female Thread and R 1/8 Male Thread Cable length: 2m CE marking directive compliance, EMC Directive, RoHS Directive Type of pressure: Gauge pressure Rated pressure range: -0.1000 to +1.000 Mpa Set pressure range: -0.1 to +1.010 MPa / -1 to +10.30 kgf/cm2 / -1 to + 10.10 bar / -14.65 to +146.5 psi Pressure withstandability: 1.5 MPa Applicable fluid: Air, non-corrosive gas units: MPa Supply voltage: 12 to 24 V DC ±10 % Ripple P-P 10 % or less Power consumption: 30 mA or less Comparative output: NPN open-collector transistor - Maximum sink current: 50 mA - Applied voltage: 30 V DC or less (between comparative output and 0 V) - Residual voltage: 2 V or less (at 50 mA sink current) Comparative output : Output operation Selectable either NO or NC by key operation Comparative output : Hysteresis Minimum 2 digits (variable) Comparative output : Repeatability ±0.4 % F.S. (within ±4 digits) Comparative output : Response time 2.5 ms, 25 ms, 250 ms, selectable by key operation Comparative output : Short-circuit protection Display: 3 + 1/2 digits, 3-color (white / red / pink) LCD display (Display update period: 250 ms) Display : Displayable pressure range (-0.100 to +1.010 MPa Protection: IP40 (IEC) Ambient temperature: 0 to +50 ℃ +32 to +122 ℉ (No dew condensation allowed), Storage: -10 to +60 ℃ +14 to +140 ℉ Ambient humidity: 35 to 85 % RH, Storage: 35 to 85 % RH Connector pin No. Terminal name and wire color: 1. +V (Brown) 2. Comparative output 1 (Black) 3. Standard type: Comparative output 2 (White) 4. 0V (Blue) M5 Female and R 1/8 Male Thread