Krebs Stormer Viscometer 500Ml Digital Display Viscometer Bgd186 new

40.2 Ku-141.0 Ku Intelligent Krebs Stormer Viscometer 500Ml Digital Display Viscometer Bgd186 For Paint Viscosity Measurement BGD 186 Intelligent Krebs Stormer Viscometer gt; gt; gt;Main Technical Parameters Measuring Range： 40.2 KU-141.0 KU (KU value)；27 cp -5,250 cp Accuracy： ±1.5% of full scale range; Repeatability： ±1.0% of full scale range; Rotor speed：200r/min±0.5 r/min; Volume of a container：approximately 500ml; Lifting range： 90mm Input voltage：110~220V/50~60Hz Power：10W Overall dimensions：210mm×180mm×500mm (L × W×H) gt; gt; gt;Operation Preparations: 1 Take out the instrument from the package, put it on a stable and smooth table. 2 Take out the spindle from the package, loosen the locking screw of connecting part of spindle , then insert the spindle（Spindle’s gap face to locking screw）, tighten the locking screw. 3.Take out the Stainless steel cup, cup holder, Lifting handle from the accessories box, install the machine according to the Picture one. Lifting handle should be tightened. 4.Take out the power line from the package, insert it to the electric outlet which located at the back of instrument. 5. Take out the temperature probe, insert it to the temperature probe interface which is located at the back of instrument. Temperature probe can be suspended in the air or immersed into the sample, now the shown value in the touch screen is current room temperature or sample temperature. 6. If you ordered mini-printer, connect it to the printer interface which is located at the back of instrument. 7. Adjust temperature of measured sample to（23±0.5）℃ and keep it during the whole test.Instrument also should be kept at the same temperature. Turn on 1. Turn on the power switch , the instrument would begin to calibrate automatically （the spindle will rotate）, this proc