JENCO Dual Parameter Analyzer 6309POT with IP-65 Case, RS-486

JENCO Dual Parameter Analyzer 6309POT with IP-65 Case, RS-486 amp; 5-Relays Description 6309POT 1/4 DIN Panel Mount pH amp; ORP Analyzer by Jenco pH amp; ORP analyzer,1/4 DIN panel mount IP-65 case. Features 2 pH and 2 ORP fully programmable relays and one for temperature. RS-485 interface, password protected with individual ID #39;s. 4-20 mA analog output is fully programmable, assignable amp; reversible. Graphical display. Tinned lead connectors. CE Approved. Ph/ORP/temp. measurement amp; control Display pH electrode efficiency Reversible amp; isolated 4~20ma output RS-485 output Bumpless calibration Graphic LCD dispaly,128 x 64with backlight Membrane switch with audio feedback Auto temp. compensation High 50/60 hz noise rejection Pipe/wall/panel mounting 1/4 DIN watertight enclosure One programmable relay for temp. CE approved Programmable linear/ORP current output or programmable linear/ anti-logarithmic current output Specifications: Model Number 6309POT Unit 1unit Control Type On/Off Temperature Compensation Range (°C) -10.0 to 120.0 Accuracy (pH: 0.1% ± 1 LSD), (ORP (Absolute): ±0.1% rdg ± 1mV), (ORP (Relative): ±0.1% rdg ± 1mV), (Temp.: ± 0.3°C) Resolution (pH: 0.01pH), (ORP(Absolute): 1mV), (ORP(Relative): 1mV), (Temp.: 0.1°C) Accuracy (mA) ±0.02 Buffer Temperature Range (°C) 0 to 60.0 Electrode Slope Compensation (%) ±30 of Ideal Slope Electrode Offset Compensation (mV) ±100 Range (pH: -2.00 to 16.00), (ORP(Absolute): -2500 to 2500mV), (ORP(Relative): -6499 to 6499mV), (Temp.: -10.0 to 120 °C) Power Source (VAC) 115/230 (50/60hz) Temperature 1 Programmable High or 1 Low pH (Potencial of Hydrogen) 2 Programmable High or 2 Low ORP 2 programmable High or 2 Low Isolation Voltage (VDC) 500 ATC Sensor Thermistor 10 Kiloohms at 25 c Pre-Amplifier Voltage (VDC) ±5 (20mA Max Output) Depth (mm) 148 Type (mA) Isolated 4 to 20 Maximum Load (W) 500 Berat (Kg) 0.5 Note : Harap menayakan stock terlebih dahulu sebelum melakukan pemesanan