Syringe glass for Analysis Lab metal Luer lock 10 ml + stopcock 3 way

Syringe made of borosilicate glass according to ISO standards colored plunger tips fused around the slanted bottom edge of the glass plunger physico-chemical properties provide protection against thermal shock corrosion resistance. Syringes are interchangeable. Features: 1. The syringe is made of heat-resistant borosilicate glass. 2. Material and construction are resistant to damage from shock and sudden changes in temperature. 3. The barrel rim is flat on both sides to prevent rolling and is wide enough for a comfortable fingertip grip. 4. It is annealed and tested until free from internal strain, to withstand repeated washings with hot water. Usage: 1. This product is equipped with an injection needle, used for subcutaneous, muscle, intravenous or dissolved drugs. 2. This syringe is non-medical grade and please do not use it in clinical practice. Note: This product is sold for 1 syringe, excluding the needle. Please choose the right specification you need. Instructions: 1. Before use, please pull out the sleeve core, then routine cleaning and disinfection. 2. After cleaning, disinfecting and adjusting the needle, please extract the liquid and place the needle, then gently push the core, clean the air in the syringe to avoid air entering the body. 3. Please take out the core sleeve and clean it immediately after injection of powder, oil, plasma, etc., so that it doesn #39;t stick. Precautions: 1. Do not use heavy alkaline solution before disinfection, can avoid heavy glass to cause water leakage 2. Can extend the shelf life if wrapped in gauze. 3. Disinfection method: ethylene oxide disinfection. 4. Press gently clean when matched with core and shell to avoid getting stuck causing shell breaking. If the syringe is stuck, please shake it a little on the table, then it can be removed. 5. Please be careful to take a soft syringe when washing and disinfecting, so as to avoid collision and damage.