DY-100C powder bulk density meter lab density tester tap density 3 tub

Metal Powder DY-100C Tap Density Meter In Testing Equipment


Powder density is the mass per unit volume.it can be classified as bulk denisty and tap density by different measuring method.Tap density tester is to measure the density of powder has been tapped
or packed by standardized and repeatable procedures according to international standards.

DY-100C Powder Density Testing Instrument

Introduction:

DY-100C Powder density tester is based on GB/T5162-2006/ISO3953:1993(tap density measuring of metal powder).For non-metallic powder,This instrument extended seveal functions.such vibration
amplitude from 3m standard extended to 1mm-15mm vibration frequency from 100-300 times per minute extended to 0-300 times per minute.vibration time from 3000 times standard extended to 0-99999
times.All of them can be setup freely.

DY-100A,B,C Powder density tester consist of adjustable-speed motor,vibration assembly,micro-computer and micro printer.,etc.It has the feature of compact structure,stable,and easy operation.,etc.

Specification:


Weight of testing object 500.00g

Volume of testing object 250.00ml(standard accessory including 25ml,50ml,100ml,250ml measuring cylinder)

Single vibration times ;=0-99999 times(the result will come out as bulk density when input zero times)

Allowable motor force:0.86 N.m.

Vibration frequency:maximum 300 round per minute(0-300 round per minute is adjustable,USA pharmacopeia standard is 300 round per mintute)

Vibration amplitude:maximum 15mm(1mm-15mm is adjustable,International standard is 3mm)

Repeatability error 1%

Accuracy error1%