Laboratory Supplies Reaction Kettle Hydrothermal Synthesis Reactor

Brand Name : DXY Origin : Mainland China Classification : Beaker Material : BORO glass 3.3 Thickness : 2.8 is_customized : Yes Laboratory Supplies Reaction Kettle Hydrothermal Synthesis Reactor High temperature and high pressure digestion tank Hydrothermal synthesis reaction sign is also called (pressure polymerization reactor, digestion tank, high-pressure digestion tank, high-pressure tank, reaction tank, pressure bomb, digestion tank, hydrothermal synthesis reactor, experimental reactor). It is a reactor for the synthesis of chemicals under certain temperature and pressure. It is widely used in the scientific research and experiment of new materials, energy, environmental engineering and other fields. It is a commonly used small reactor for scientific research in university teaching, scientific research units and chemical laboratories Volume: 5ml-500ml (optional) Pressing mode: screw cap, manual tightening Material: outer cup: 1Cr18Ni9Ti Inner cup: polytetrafluoroethylene Maximum pressure: 3Mpa Maximum temperature: 180C (organic matter test 120 ) Maximum temperature of ppl 250 (120 for organic matter test) Heating and cooling rate: 5 / min Operation steps 1. Pour the reactant into the polytetrafluoroethylene sleeve, and ensure the feeding coefficient is less than 0.8 2. Make sure that the position of the lower gasket of the kettle body is correct (the bulge is facing down), and then put in the polytetrafluoroethylene sleeve and the upper gasket. First tighten the kettle cover, and then screw the kettle cover with the screw until it is tightened 3. Place the hydrothermal synthesis reactor in the heater and raise the temperature to the require