5.0/ 5.0
100% pembeli merasa puas
64 rating ā¢ 16 ulasan
5(64)100%
4(0)0%
3(0)0%
2(0)0%
1(0)0%
Atur jumlah dan catatan
Stok Total: 13
Subtotal
Rp1.325.000
DFRobot Gravity : Analog pH Sensor / Meter Pro Kit V2
Rp1.325.000
- Kondisi: Baru
- Min. Pemesanan: 1 Buah
- Etalase: 04 - DFROBOT OFFICIAL
šššš: ššššš šššššššš ššššš šššš šššššššš šš šššš šššššš ššššššššš
SKU: KB2003 / SEN0169-V2
š ššššššš:
3.3~5.5V wide voltage input
Hardware filtered output signal, low jitter
Gravity connector and BNC connector, plug-and-play, no soldering required
Software library supports two-point calibration and automatically identifies standard buffer solution
Uniform size and connector, convenient for the design of mechanical structures
Industrial Probe - Support 7*24 Measurement
Upgraded Transmitter - More Accurate and Stable
šššššš ššššš:
Signal Conversion Board (Transmitter) V2
Supply Voltage: 3.3~5.5V
Output Voltage: 0~3.0V
Probe Connector: BNC
Signal Connector: PH2.0-3P
Measurement Accuracy: Ā±0.1@25ā
Dimension: 42mm*32mm/1.66*1.26in
pH Probe
Probe Type: Industrial Grade
Detection Range: 0~14
Temperature Range: 0~60Ā°C
Accuracy : Ā± 0.1pH (25 ā)
Response Time: <1min
Probe Life: 7*24hours >0.5 years (depending on the water quality)
Cable Length: 500cm
ššššššš šššš:
pH Probe (Industrial Grade) x1
pH Signal Conversion Board V2 x1
Gravity Analog Sensor Cable x1
Waterproof Gasket x2
Screw Cap for BNC Connector x1
M3 * 10 nylon pillar x4
M3 * 5 screws x8
šššš šššš: https://www.dfrobot.com/wiki/index.php/Gravity:_Analog_pH_Sensor/Meter_Kit_V2_SKU:SEN0161-V2
Produk lain terkait :
Microcontroller: https://www.tokopedia.com/khursiot/etalase/microcontroller
Modul & Sensor: https://www.tokopedia.com/khursiot/etalase/module-dan-sensor
Product DFROBOT - https://www.tokopedia.com/khursiot/etalase/dfrobot
Arduino - https://www.tokopedia.com/khursiot/etalase/arduino
SKU: KB2003 / SEN0169-V2
š ššššššš:
3.3~5.5V wide voltage input
Hardware filtered output signal, low jitter
Gravity connector and BNC connector, plug-and-play, no soldering required
Software library supports two-point calibration and automatically identifies standard buffer solution
Uniform size and connector, convenient for the design of mechanical structures
Industrial Probe - Support 7*24 Measurement
Upgraded Transmitter - More Accurate and Stable
šššššš ššššš:
Signal Conversion Board (Transmitter) V2
Supply Voltage: 3.3~5.5V
Output Voltage: 0~3.0V
Probe Connector: BNC
Signal Connector: PH2.0-3P
Measurement Accuracy: Ā±0.1@25ā
Dimension: 42mm*32mm/1.66*1.26in
pH Probe
Probe Type: Industrial Grade
Detection Range: 0~14
Temperature Range: 0~60Ā°C
Accuracy : Ā± 0.1pH (25 ā)
Response Time: <1min
Probe Life: 7*24hours >0.5 years (depending on the water quality)
Cable Length: 500cm
ššššššš šššš:
pH Probe (Industrial Grade) x1
pH Signal Conversion Board V2 x1
Gravity Analog Sensor Cable x1
Waterproof Gasket x2
Screw Cap for BNC Connector x1
M3 * 10 nylon pillar x4
M3 * 5 screws x8
šššš šššš: https://www.dfrobot.com/wiki/index.php/Gravity:_Analog_pH_Sensor/Meter_Kit_V2_SKU:SEN0161-V2
Produk lain terkait :
Microcontroller: https://www.tokopedia.com/khursiot/etalase/microcontroller
Modul & Sensor: https://www.tokopedia.com/khursiot/etalase/module-dan-sensor
Product DFROBOT - https://www.tokopedia.com/khursiot/etalase/dfrobot
Arduino - https://www.tokopedia.com/khursiot/etalase/arduino
Ada masalah dengan produk ini?