H-type Sealed Two-compartment Electrolytic Cell

Stock silahkan ditanyakan Contoh harga utk cell saja Electrolytic cell: Product Name: H type replaceable membrane unsealed electrolytic cell 1. Electrolytic cell: monomer capacity 20-500ml can be customized 2. The standard opening of the lid is: three electrode holes with a diameter of 6mm on each lid. Can also be opened according to customer needs. 3. Flange inner diameter 16mm outer diameter 30mm Product List: 1. Two electrolytic cells (one set) 2. Two TEflon LIDS (with three 6.2mm electrode holes in the lid) 3. Several electrode fixing rings 4. A stainless steel clip 5. Two leak-proof gaskets Platinum electrode: Common specifications of platinum sheet: 10 x 10mm, The thickness of platinum sheet is 0.1 Full length of electrode: conventional size 100mm(excluding the platinum part) (electrode rod 80mm) Platinum purity: more than 99.99% Platinum mesh electrode: Purity of platinum net: above 99.99% Platinum mesh: 52 meshes Electrode rod: diameter 6mm, length 80mm (excluding the length of the net) Conventional platinum mesh shape: square, (can be customized round, if necessary, please contact the seller) Silver chloride electrode: Parameters: 1, electrode resistance: ≤K ω 2, liquid collateral flow rate: ≥1 drops /10 minutes R0302: diameter 3.8 mm; Salt bridge solution - 3.5m /KCL; Electrode potential -0.2046V/ pair NHE; Operating temperature -≤40℃. R0303: diameter 6.0 mm; Salt bridge solution - 3.5m /KCL; Electrode potential -0.2046V/ pair NHE; Operating temperature -≤60℃. R0305: diameter 6.0 mm; Salt bridge solution -saturated KCL; Electrode potential -0.2046V/ pair NHE; Operating temperature -≤60℃. JJ110 Electrode clamp: 1. The sample sheet can be replaced at will. The built-in conductive platinum sheet cannot be used as a sample sheet. 2, not high temperature, it is recommended to use at room temperature. 3. Length of electrode rod is 80mm, diameter is 6mm, built-in platinum sheet is 10*15mm, purity of platinum sheet is 99.