HANNA HI 8733 Portable Multi range Conductivity Meter

HI 8733 Multi range EC Meter The HI 8733 is a durable, portable EC meter designed for use in areas of production and quality control. It is supplied with a four-ring conductivity probe to allow for four ranges of measurement. Conductivity readings are adjusted with Automatic Temperature Compensation (ATC), assuring users of consistent and accurate measurements. Adjustable (beta)to be set from 0 to 2.5%/oC; this factor corrects the conductivity reading by the set percentage for each degree Celsius change in the sample. One-point Calibration- The HI 8733 can be calibrated at one point in a standard conductivity solution. The calibration knob located on the top of the meter is easily adjusted to the correct calibration standard. Specifications: EC Range :0.0 to 199.9 uS/cm; 0 to 1999 uS/cm; 0.00 to 19.99 mS/cm; 0.0 to 199.9 mS/cmEC. Resolution :0.1 uS/cm; 1 uS/cm; 0.01 mS/cm; 0.1 mS/cm. EC Accuracy :+-1% FS (excluding probe error). EC Calibration :manual, one-point through EC knob. Temperature Compensation :automatic, 0 to 50oC (32 to 122oF) with (beta) adjustable from 0 to 2.5%/oC. Electrode/Probe :HI 76302W conductivity probe with internal temperature sensor, DIN connector and 1 m (3.3) cable (included). Battery Type/Life :9V / approximately 100 hours of continuous use. Environment :0 to 50oC (32 to 122oF); RH max 95%. Dimensions :145 x 80 x 36 mm (5.7 x 3.1 x 1.4). Weight :230 g (8.1 oz) Ordering Information: HI 8733 is supplied with HI 76302W conductivity probe, 12880 uS/cm HI 70030 calibration solution sachet (1), battery, and instruction manual. #KONFIRM STOK