Bunsen Burner

FOTO YANG DIPASANG ADALAH FOTO ASLI BARANGNYA YA... Perhatikan foto untuk mengecek kondisi barang. Barang sudah di periksa fisik dan fungsinya sebelum dikirim. Bunsen Burner - PQ22 Merk : Fisher Type : Mecker 3-902 For use with Natural Gas Buatan USA - More than 10,500 BTU per hour - Broad, uniformly hot flame - Deep grid prevents flash-backs - Unique injector design - Stable die-cast base - Chromium-finish tube and cap The Fisher Burner meets Federal Specification GG-B-817 and embodies the latest recommendations of the National Bureau of Standards. The Grid gives an intense heat from many tiny, hot flames, each supplied with the proper mixture of gas and air at a pressure low enough to prevent flash-backs. Properly operated, this burner will yield more than 10,500 BTU per hour. THE GREATEST HEAT IS FOUND ABOUT ½ INCH ABOVE THE GRID, IN THE HEART OF THE FLAME – NOT at the tip of the flame, as in a Bunsen burner. FOR HIGHEST EFFICIENCY... 1. Use the largest gas supply available. Be sure all stopcocks have a large, clean. Unobstructed bore. 2. The stopcock to the gas supply should be wide open. Open the burner air-ring wide, except with gases requiring less air. 3. Adjust the needle-valve at the base of the burner until the flame tends to leave the grid. The flame will then be at its optimum temperature. Kondisi Baru, belum pernah dipakai, bekas display, Tidak rusak dan berfungsi dengan baik Isi : 1 unit Bunsen burner, 1 Dus kemasan Kondisi dari barang Ex display atau Stok lama: - Dus kemasan asli, tidak terlihat baru / kotor (Karena ex display/stok lama) - Kondisi barang tidak 100% kinclong / mulus (kemungkinan ada noda, karena ex display/stok lama) - Harga jauh lebih Murah - Barang berfungsi seperti barang baru pada umumnya - Stok terbatas